Ohh ok, is there no version of Wii sports on the drive? I didn’t see it in the regular Wii wheel. When I was watching videos of how to setup my dolphin bar on pc it’s like the first game everyone loads to test it.
Most of these were already fixed. However I did check them one by one.
Fixed the tekkens and the crusin games. Will be up in the next update.
Thank you for the input.
Not a console game so not sure if i should post this.
SegaRineridge - Ghost Squad Evo - Teknoparrot game, smearing graphics once gameplay starts in full screen. Also windows complains another instance of demulshooter is already running when launched, a common issue with some games in the gun wheel such as demul games (naomi and atomiswave).
Weird, I just updated through Syncovery and Im still getting the same message on Cruisn' USA and Breath of the Wild. I wonder if Syncovery isn't saving any updates.
I had this problem as well, had to go into duckstation manually and configure the controls. Click load profile and select xbox controller, then it should work from there :)
Shotgun Wheel (supermodel emulator) - the lost world - jurrasic park. Only the x axis works in game. Can't aim higher or lower than the center of the screen, but can aim left and right. Not due to calibration, as for as I can tell.
I think i might be familiar with what you are saying, hotd model 1 seems to have textures missing, at least on mine there are red green blue textures, perhaps a bad rom?
PC Fighting Wheel - Street Fighter 5 Championship Edition
For some reason, the Player 1 heavy kick (e.g. "X" key) is not recognizing input.
Not sure if it is an UCR issue or Joy2Key?
Want to echo this one, would love to see it resolved. I will try to see how i can fix it as well. I have 8 buttons using an ipac, but there is no heavy kick.
I think i know whats wrong but I dont know enough about the ucr program and dont want to do another config sync to fix it, but the problem is rt and lt are not mapped. They are mapped as RS and LS which i assume is Right stick button and left stick button.
They need to be mapped as axis buttons apparently because the developer says on an xbox they are are analog. They are not treated as standard buttons. This website talks a bit about it, sure it would take chris 5 minutes to fix since he knows more about this program.
Edited: I fixed mine setting my triggers up like in this image, hopefully chris will fix, should be easy. Substituting the appropriate keyboard key designations chris uses. I think player 1 triggers are C and 5.
The game loads however for me on a geforce 1030 card textures are missing when you play the game and luigis invisible. A youtube video mentions a texture patch, but having trouble locating, someone also suggested run vaccum.exe in windows 7 compatibility but then the game just crashes. Its a really cool game, and some youtube users appear to have it working fine...
Update: Apparently you need to have your computer set to your tv's native resolution, when i set my desktop to 4k which is the native resolution of my tv, the issue went away. Need to talk to chris since he knows how to use rl to change resolution.
Wii U - Wii Sports - flashes open than closes.
Its actually rated as unplayable on the Cemu Compatibility website.
Ohh ok, is there no version of Wii sports on the drive? I didn’t see it in the regular Wii wheel. When I was watching videos of how to setup my dolphin bar on pc it’s like the first game everyone loads to test it.
@MotorCityFool Ive recently put it back on the wii, I think I just got to update though
Teenage Mutant Ninja Turtle: Turtles in Time - MAME- bad ROM, launches but hangs
Marble Madness- MAME- bad ROM, doesn't launch
Cruis'n USA- MAME- bad ROM, doesn't launch
Cruis'n World- MAME- bad ROM, doesn't launch
Dodonpachi- MAME- launching issue with FBA, crashes
Primal Rage- MAME- bad ROM, doesn't launch
San Francisco Rush- MAME- bad ROM, doesn't launch
Tekken 1- Tekken Wheel- Doesn't load
Tekken 2- Tekken Wheel- Doesn't load
Tekken 4- Tekken Wheel- Doesn't load
All- Vertical SHMUP MAME Wheel- Nothing loads
Dodonpachi- CAVE/DEMUL SHMUP Wheel- Doesn't load
Dodonpachi Black Label- CAVE/DEMUL SHMUP Wheel- Doesn't load
Deathsmiles (dsmbl)- CAVE/DEMUL SHMUP Wheel- Doesn't load
Futari- CAVE/DEMUL SHMUP Wheel- Doesn't load
Most of these were already fixed. However I did check them one by one. Fixed the tekkens and the crusin games. Will be up in the next update. Thank you for the input.
Not a console game so not sure if i should post this.
SegaRineridge - Ghost Squad Evo - Teknoparrot game, smearing graphics once gameplay starts in full screen. Also windows complains another instance of demulshooter is already running when launched, a common issue with some games in the gun wheel such as demul games (naomi and atomiswave).
If it runs... I probably cant do much. However I can take a look at the demulshooter issue.
Legend of Zelda: Breath of the Wild from Wii U - it says "Need to update system". I believe DLC needs to be included in order to run properly.
Also, racing games like Cruisn' USA aren't loading properly. It says "no exe path defined".
Ill try and fix Zelda
If you mean Cruisn for mame. I just fixed it.
Fixed Breath of the wild. DLC was added to the N folder
Weird, I just updated through Syncovery and Im still getting the same message on Cruisn' USA and Breath of the Wild. I wonder if Syncovery isn't saving any updates.
Simpsons Bowling - mame - loads and says see Manuel as it freezes.
Delete the NVRam file, Hold down F2 to recompile the rom,
Visual Pinball - Stern Beatles & Stern Kiss not loading.
Beatles
PuPlayer playlistplayex pTopper, "topper","",0.1
Script Error
Line 1638 Object required: "
Kiss
Script error
Line: 1
ActiveX component can't create object: "UltraMDM.DMDObject"
Screenshots attached
Pinball Arcade - all games - games running but not fullscreen
Visual Pinball - X-Men (Stern) There is no B2S screen resolution for 'ScreenRes.txt' in the current folder 'C:\temp\X-Men LE (Stern) v1.0.3'
PS1 Wheel - All games running with duckstation (multi disc games running with Mediafen are OK) - Xbox controller not detected
I had this problem as well, had to go into duckstation manually and configure the controls. Click load profile and select xbox controller, then it should work from there :)
Last update as of 2/6/21
Racing Games Wheel - All MAME games- 'No exe path defined'
Racing Games Wheel- Daytona 2 Battle on the Edge- 'network board not present'
Racing Games Wheel- Daytona 2 Power edition- 'network board not present'
Also,
MAME-TMNT: Turtles in Time - launches but hangs at ROM RAM check
Tekken Wheel-Tekken 4- Doesn't load
CAVE/DEMUL SHMUP Wheel-Dodonpachi Black Label-Removed? CAVE/DEMUL SHMUP Wheel-Futari- Removed?
Switch Wheel - No games will start, error message "ROM format invalid", Emulator opens behind HS and must alt-tab to focus and force close
NHL 2004 rivals doesn’t load. Xbox.
Shotgun Wheel (supermodel emulator) - the lost world - jurrasic park. Only the x axis works in game. Can't aim higher or lower than the center of the screen, but can aim left and right. Not due to calibration, as for as I can tell.
Mame - 39 in 1 - Extremely slow to start
Mame - 4nin-uchi - Preview video induces seizures
Mame - Abunai Houkago - Adult title art
Mame - Ace - 2 players required - add banner?
Mame - Ace Driver - Crash on start
Mame - Ace Driver Victory Lap - Crash on start
Mame - Acrobat Mission - Crash on start
Mame - Acrobatic Dog Fight - Title screens cut off
Mame - Air Rescue - Shows 2 screens but bezel wrong
Mame - Alien Crush - Pinball but doesn't use pinball controls, wrong wheel
Mame - Alpha One - Wrong screen aspect ratio, preview video text reversed
Mame - Alpine Racer - Default volume very low
Mame - Alpine Racer 2 - Default volume very low
Mame - Animal Catch - Won't start, ROM error
Mame - Arabian Magic - No sound
Mame - Assault - Crashes at startup
Mame - Asteroids - Stuck on diag screen after startup
Mame - Astro Wars - No sound in game
Mame - Atari Basketball - Default up/down controls reversed
Mame - Atari Football - 2 players required - add banner?
Mame - Atari Soccer - Default up/down controls reversed
Mame - Attax - Default up/down controls reversed
Mame - Avenging Spirit - Default volume very loud
Mame - Aztarac - Default controls for Xbox don't allow controlling the turret
Mame - B-Wings - Cabinet art doesn't match game
Mame - B.C. Kid - Sorted as B.C. Kid but cabinet art is Bonk's Aventure
Mame - Back Fire - No preview video
Mame - Backfire! - No preview video, shows 2 screens but bezel wrong
Street Fighter V - pop up talks about offline mode, noway to get it past it with arcade controls.
Oops just realized it said no PC games. I think this is an easy fix though, just not sure what.
soul edge on the zinc wheel loads but none of the action keys work except the player and coin keys
house of the dead 1 on the gun wheel loads and the graphics are not clear
I think i might be familiar with what you are saying, hotd model 1 seems to have textures missing, at least on mine there are red green blue textures, perhaps a bad rom?
Yes bad textures thats a better explanation!
PC Fighting Wheel - Street Fighter 5 Championship Edition For some reason, the Player 1 heavy kick (e.g. "X" key) is not recognizing input. Not sure if it is an UCR issue or Joy2Key?
Want to echo this one, would love to see it resolved. I will try to see how i can fix it as well. I have 8 buttons using an ipac, but there is no heavy kick.
I think i know whats wrong but I dont know enough about the ucr program and dont want to do another config sync to fix it, but the problem is rt and lt are not mapped. They are mapped as RS and LS which i assume is Right stick button and left stick button.
They need to be mapped as axis buttons apparently because the developer says on an xbox they are are analog. They are not treated as standard buttons. This website talks a bit about it, sure it would take chris 5 minutes to fix since he knows more about this program.
Edited: I fixed mine setting my triggers up like in this image, hopefully chris will fix, should be easy. Substituting the appropriate keyboard key designations chris uses. I think player 1 triggers are C and 5.
https://steamuserimages-a.akamaihd.net/ugc/771728814653088835/558890517091773B9D0E1E70BF991D8A7F0A6AE5/
Visual Pinball: X-Men LE - line 115 script error object required controller Evil Dead 2018 - script error no controller Evil Dead 2 - activeX can't great pinup.player.pindisplay Goldorak - line 414 script error object required controller
Luigis mansion arcade-teknoparrot
The game loads however for me on a geforce 1030 card textures are missing when you play the game and luigis invisible. A youtube video mentions a texture patch, but having trouble locating, someone also suggested run vaccum.exe in windows 7 compatibility but then the game just crashes. Its a really cool game, and some youtube users appear to have it working fine...
Update: Apparently you need to have your computer set to your tv's native resolution, when i set my desktop to 4k which is the native resolution of my tv, the issue went away. Need to talk to chris since he knows how to use rl to change resolution.